Fitting of Engineered Timberlay Walnut Wood Flooring, 190x20 mm

Engineered Timberlay Walnut Wood Flooring, 190x20 mm

Engineered Timberlay Walnut Wood Flooring, 190x20 mm

Engineered Timberlay Walnut Wood Flooring, 190x20 mm

Engineered Timberlay Walnut Wood Flooring, 190x20 mm

Before the flooring installation...

Before the flooring installation...

Before the flooring installation...

Project at a glance...

Before & after

Before the works...

In this Dulwich house we laid approx. 50 sqm sqm of walnut engineered wood flooring. During our free survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install Timberlay Engineered Walnut Wood Flooring, 190x20 mm with solid white scotia beading around perimeter.

How we completed the floor works...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing carpets and its preparation for disposal to our waste facility.

In this flooring project we installed 50 sqm of engineered wood flooring, specifically - Timberlay Engineered Walnut Wood Flooring, 190x20 mm with floating installation, over onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .

When installing new floors an expansion gap of approx. 10 mm must be left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with solid white scotia beading around the perimeter.

Due to the change of level, after the new flooring was installed - our experienced, local Dulwich floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as scheduled and to the satisfaction of the client.