-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Parquet flooring with stairs nosing
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Herringbone Parquet Flooring Installation
-
Before the floor installation...
-
Before the works...
After a pilot installation on the main landing and master bedroom in this Hemel Hempstead property we have now completed a second stage of approx. 35 sqm of oak parquet flooring throughout the entire first level.
Our client decided to continue their original parquet flooring installation with the same product and subfloor preparation with 35 sqm oak parquet flooring and white primed scotia beading around perimeter.
How we completed the floor installation works...
After our team have checked all service, property & products details on site, including the amount of product supplied, they started with lifting existing carpets and preparing it for disposal to our waste facility.
Parquet flooring laying requires many years of experience, skills and the right carpentry equipment. Depending on the overall condition of the subfloor, our initial assessment identifies if sepcific subfloor preparation will be required.
In this flooring project we installed 35 sqm of oak parquet flooring, specifically - Timbercraft Herringbone Engineered Oak Parquet Flooring, Lacquered, 90x400x18 Mm with glue-down installation, over plied timber subfloor.
In this project we also fitted parquet flooring (matching plank) throughout 2 m steps - step, nosing & riser. Our stairs installation service is inclusive of supplying matching the floor stair nosing (tongue-and-groove or click). For real wood products we also stain the nosing (when necessary) to match the colour of the planks.
When laying new floors an expansion gap of approx. 10 mm must be left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with primed scotia beading around the perimeter.
As per our initial assessment, the subfloor was prepared with 9 mm GP plywood before the floor installation.
Due to the change of level, after the new flooring was installed - our experienced, local Hemel Hempstead floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall, this floor laying project was completed as scheduled by our local to Hemel Hempstead floor fitters and the new floors met the expectations and the satisfaction of its owners.
