Quickstep Natural Varnished Oak Laminate Flooring
Quickstep Natural Varnished Oak Laminate Flooring
Quickstep Natural Varnished Oak Laminate Flooring
Before the installation...
Before the installation...
Project at a glance...
- Location
- Twickenham, TW1, TW4, TW13
- Property
- House
- Services
- Floor Fitting, Beading Installation
- Size
- 9 sqm installed
- Flooring
- QuickStep Eligna Natural Varnished Oak Laminate Flooring
- Subfloor
- Plied timber subfloor
- Installation
- Floating installation Duralay Excel Silver 3.7 mm underlay with DPM barrier
- Finish
- Lacquer 1 coat primer + 2 coats
- Edges
- Matching the floor scotia beading
Before & after
Before the works...
In this Twickenham house we installed approx. 9 of oak laminate flooring. During our obligation-free survey, we did a thorough inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor fitting, beading installation, and install QuickStep Eligna Natural Varnished Oak Laminate Flooring with matching the floor scotia beading around perimeter.
How we completed the floor works...
After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing and its preparation for disposal to our waste facility.
In this flooring project we laid 9 sqm of laminate flooring - QuickStep Eligna Natural Varnished Oak Laminate Flooring with floating installation over plied timber subfloor onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .
Laminate flooring products are relatively thin and require a good subfloor level. Our laminate floor installation service will consider this from initial survey and during the installation itself.
When laying new floors an expansion gap of approx. 10 mm must be left around the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with matching the floor scotia beading around the perimeter.
Overall the project was completed as scheduled and to the satisfaction of the client.
