Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Engineered Oak Flooring Fitting
Before the Installation
Project at a glance...
- Location
- Tottenham, N17
- Services
- Floor Fitting
- Size
- 52 sqm installed
- Flooring
- Timberlay Delamere Oak Engineered Flooring, Brushed & Oiled, 190x3x14 mm
- Subfloor
- 12 mm GP plywood
- Installation
- Floating installation
- Finish
- Lacquer 1 coat primer + 2 coats
- Edges
- Solid oak scotia beading
Before & after
Before the works...
In this South Tottenham property we installed approx. 52 sqm of oak engineered wood flooring. During our free on-site survey, we did a thorough inspection of the floors and discussed with the client all possible choices, followed by itemised quote with our floor fitting prices for engineered wood flooring.
Our client decided to go for floor fitting and install 52 sqm oak engineered wood flooringwith solid oak scotia beading around perimeter.
How we carried out the floor installation works...
One of the challenges we faced during the floor works was to complete the floor works in stages, due to bulky pieces of furniture, which could not be removed from the rooms.
In this flooring project we laid 52 sqm of engineered wood flooring, specifically - Timberlay Delamere Oak Engineered Flooring, Brushed & Oiled, 190x3x14 mm with floating installation, over .
Our recommendations and options for insulation & sound-proofing and damp-proofing for wooden floors are discussed during initial site visit and during the product selection process.
When installing new floors an expansion gap of approx. 10 mm must be left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with solid oak scotia beading around the perimeter.
As per our initial assessment, the subfloor was prepared with 12 mm GP plywood before the floor installation.
Due to the change of level, after the new flooring was installed - our experienced, local South Tottenham floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall, this floor laying project was completed as originally planned by our local to Tottenham floor fitters and the new floors met the expectations and the satisfaction of the client.
