Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Laminate Flooring Installation
Before the Installation
Project at a glance...
- Location
- Greenwich, SE10
- Services
- Floor Fitting
- Size
- 25 sqm installed
- Flooring
- QuickStep Capture Chic Walnut Laminate Flooring
- Removed & disposed
- Carpets
- Subfloor
- Concrete subfloors
- Installation
- Floating installation 3 mm rubber underlay
- Finish
- Lacquer 1 coat primer + 2 coats
- Edges
- Solid white scotia beading
Before & after
Before the works...
In this Greenwich property we laid approx. 25 sqm of walnut laminate flooring. During our free on-site survey, we did detailed inspection of the floors and discussed with the client all possible choices, followed by itemised quote with our floor installation prices for laminate flooring.
Our client decided to go for floor fitting with installation of 25 sqm walnut laminate flooringwith solid white scotia beading around perimeter.
How we completed the floor installation works...
One of the challenges we experienced during this project was to complete the floor works in stages, due to larger pieces of furniture, which could not be moved out.
After our laminate floor installers have checked all service, property & products details on site, including the amount of product supplied, they started with lifting existing carpets and its preparation for disposal to our waste facility.
In this flooring project we laid 25 sqm sqm of laminate flooring - QuickStep Capture Chic Walnut Laminate Flooring with floating installation over concrete subfloors onto 3 mm rubber underlay .
Laminate flooring products are relatively thin and require a good subfloor level. Our laminate floor installation service will consider this from initial survey and during the laying itself.
When laying new floors an expansion gap of approx. 10 mm is left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with solid white scotia beading around the perimeter.
Due to the change of level, after the new flooring was installed - our experienced, local Greenwich floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall, this floor laying project was completed as scheduled by our local to Greenwich floor fitters and the new floors met the expectations and the delight of the client.
