-
Engineered Oak Flooring Installation
-
Engineered Oak Flooring Installation
-
Engineered Oak Flooring Installation
-
Engineered Oak Flooring Installation
-
Before the installation works...
-
Before the installation works...
-
Before the installation works...
-
Moisture meter depicting good moisture level...
Before the works...
In this Redbridge flat we fitted approx. 67 sqm of oak engineered wood flooring. During our obligation-free survey, we did a thorough inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor fitting, subfloor preparation, beading installation, and install with primed scotia beading around perimeter.
How we completed the floor works...
After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing and its preparation for disposal to our waste facility.
In this project we installed 67 sqm of engineered wood flooring, with floating installation, over concrete subfloors onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .
When laying new floors an expansion gap of approx. 10 mm must be left around the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with primed scotia beading around the perimeter.
As per our initial assessment, the subfloor was prepared with 18 mm GP plywood before the floor installation.
Due to the change of level, after the new flooring was installed - our experienced, local Redbridge floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall the project was completed as planned and to the delight of the client.
