-
Stairs Floors Installation
-
Stairs Floors Installation
-
Stairs Floors Installation
-
Stairs Floors Installation
-
Before the Installation
-
Before the Installation
-
Evolve Engineered Oak Wood Flooring Installation
-
Evolve Engineered Oak Wood Flooring Installation
-
Evolve Engineered Oak Wood Flooring Installation
-
Evolve Engineered Oak Wood Flooring Installation
Before the works...
In this Crystal Palace property we fitted approx. 50 sqm of oak engineered wood flooring. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible choices, followed by detailed quote with our floor fitting pricing for engineered wood flooring.
Our client decided to go for floor fitting with installation of 50 sqm oak engineered wood flooringwith solid quadrant scotia beading around perimeter.
How we carried out the floor fitting works...
One of the challenges we faced during the floor works was to complete the floor works in stages, due to larger pieces of furniture, which could not be removed from the rooms.
After our team have checked all service, property & products details on site, including the amount of product supplied, they started with lifting existing carpets and its preparation for disposal to our waste facility.
During this flooring project we installed 50 sqm of engineered wood flooring, specifically - Evolve Engineered Oak Flooring, Smoked, Brushed & Lacquered with floating installation, over plied timber subfloor onto 5 mm rubber sound insulation .
Our recommendations and options for underlays & sound-proofing and damp-proofing for wooden floors are discussed during initial site visit and during the product selection process.
In this project we also fitted engineered wood flooring (matching plank) throughout 28 stair steps - step, nosing & riser. Our stairs installation service is inclusive of supplying matching the floor stair nosing (tongue-and-groove or click). For real wood products we also colour match the nosing (when necessary) to match the appearance of the planks.
When laying new floors an expansion gap of approx. 10 mm must be left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with solid quadrant scotia beading around the perimeter.
Due to the change of level, after the new flooring was installed - our experienced, local Crystal Palace floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall, this floor fitting project was completed as originally planned by our local to Crystal Palace floor fitters and the new floors met the expectations and the delight of the client.
