Installation of Timberlay Engineered Oak Flooring
Installation of Timberlay Engineered Oak Flooring
Installation of Timberlay Engineered Oak Flooring
Before the flooring installation...
Before the flooring installation...
Project at a glance...
- Location
- Streatham, SW16
- Property
- Property
- Services
- Floor Fitting, Beading Installation
- Size
- 25 sqm installed
- Flooring
- Timberlay Engineered Oak Flooring, Lacquered, 190x4x20 mm
- Removed & disposed
- Laminate flooring
- Subfloor
- Original floorboards, floorboards refitting & local repairs
- Installation
- Floating installation Duralay Excel Silver 3.7 mm underlay with DPM barrier
- Finish
- Lacquer 1 coat primer + 2 coats
- Edges
- Primed scotia beading
Before & after
Before the works...
In this Streatham Property we fitted approx. 25 sqm sqm of oak engineered wood flooring. During our obligation-free survey, we did a thorough inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor fitting, beading installation, and install Timberlay Engineered Oak Flooring, Lacquered, 190x4x20 mm with primed scotia beading around perimeter.
How we completed the installation works...
After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing laminate flooring and its preparation for disposal to our waste facility.
During this project we installed 25 sqm of engineered wood flooring, specifically - Timberlay Engineered Oak Flooring, Lacquered, 190x4x20 mm with floating installation, over original floorboards onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .
When laying new floors an expansion gap of approx. 10 mm is left around the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with primed scotia beading around the perimeter.
As per our initial assessment, the subfloor was prepared with floorboards refitting & local repairs before the floor works.
Due to the change of level, after the new flooring was installed - our experienced, local Streatham floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall the project was completed as scheduled and to the satisfaction of the client.
