-
Mosaic Fingers Flooring Installation
-
Mosaic Fingers Flooring Installation
-
Mosaic Fingers Flooring Installation
-
Mosaic Fingers Flooring Installation
-
Before the floor installation...
-
Before the floor installation...
Before the works...
In this Brockley house we installed approx. 18 sqm of merbau mosaic finger panels. During our obligation-free survey, we did a thorough inspection of the floors and discussed with the client all available choices, followed by comprehensive quote with our floor fitting prices for mosaic finger parquet flooring panels.
Our client decided to go for floor fitting and floor sanding and install 18 sqm merbau mosaic finger panelswith primed scotia beading around perimeter.
How we carried out the floor fitting works...
Before the works...
The merbau mosaic finger panels in this Brockley house was looking tired and in timely need of restoration. During our free site survey, we did detailed inspection of the wooden floors & discussed with the client all possible choices, followed by comprehensive quote with our floor restoration service prices for mosaic finger panels.
Our client has decided to go for floor fitting and floor sanding of 18 sqm merbau mosaic finger panels and finishing the floors in matt Lacquer.
How we carried out this merbau mosaic finger panels restoration...
Parquet flooring comprises of large quantity of small flooring pieces forming a pattern. Our team will carefully inspect the floors for movement and hollowness, and take steps on this stage, if required.
During the merbau parquet flooring sanding the entire area is going through a sanding process of levelling with coarser grids, finishing with finer grids, and finally buffing, prior to the application of the sealant & between the coats, for perfect results.
When installing new floors an expansion gap of approx. 10 mm must be left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.
In this project the client decided to go with primed scotia beading around the perimeter.
Our works included approx. 18 sqm merbau mosaic finger panels floor renovation and finishing in matt lacquer. The sealing went down with 1 coat of primer and 2 coats of Bona Mega lacquer.
Due to the change of level, after the new flooring was installed - our experienced, local Brockley floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.
Overall, this floor laying project was completed as planned by our local to Brockley floor fitters and the new floors met the expectations and the satisfaction of its owners.
Overall, this floor renovation project in Brockley was completed as planned and to the satisfaction of the client.
