Project: Fit Parquet Flooring Base for Hotel Reception within Carpets with Brass Border Around

  • Parquet Flooring Fitting for Hotel Reception with Brass Border #1

  • Parquet Flooring Fitting for Hotel Reception with Brass Border #2

  • Parquet Flooring Fitting for Hotel Reception with Brass Border #3

  • Parquet Flooring for Hotel Reception (before the works) #4

  • Parquet Flooring for Hotel Reception (before the works) #5

  • Parquet Flooring Fitting for Hotel Reception with Brass Border 1
  • Parquet Flooring Fitting for Hotel Reception with Brass Border 2
  • Parquet Flooring Fitting for Hotel Reception with Brass Border 3
  • Parquet Flooring for Hotel Reception (before the works) 4
  • Parquet Flooring for Hotel Reception (before the works) 5

Before the works

The large carpeted area in this 5 star London hotel, would need a new desk station, which has to be positioned over brand new oak parquet flooring, finished in dark mahogany colour and sealed with Bona Traffic Matt lacquer.

How we did it...

To make this project reality our team had to reduce the limestone subfloor with approx. 10 mm and install a curved brass profile, which is bended around the perimeter as requested by the hotel's designers.

The new subfloor was leveled with two-component high-performance smoothing compound and the new parquet flooring was laid with single border around following the curve of the bended brass profile on the perimeter.

The parquet flooring product selected for this installation was a 15 mm prime oak block, to keep the level as low as possible and provide a good sandable depth.

As most of the parquet flooring in this hotel, the floors were finished with dark mahogany colour and sealed with Bona Traffic Matt lacquer.