Fitting of Timberlay Engineered Oak Flooring, Brushed & Oiled, 190x14 Mm

Timberlay Engineered Oak Flooring Installation

Timberlay Engineered Oak Flooring Installation

Before sealing...

During the works...

Before the works...

Project at a glance...

Before & after

Before the works...

In this Islington house we laid approx. of maple engineered wood flooring. During our free survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install Timberlay Engineered Oak Flooring, Brushed & Oiled, 190x14 mm with primed quadrant beading around perimeter.

How we completed the floor works...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing carpets and its preparation for disposal to our waste facility.

During this flooring project we installed of engineered wood flooring, specifically - Timberlay Engineered Oak Flooring, Brushed & Oiled, 190x14 mm with floating installation, over original floorboards onto underlay supplied by client .

When installing new floors an expansion gap of approx. 10 mm is left around the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with primed quadrant beading around the perimeter.

Due to the change of level, after the new flooring was installed - our experienced, local Islington floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as originally planned and to the delight of the client.