Looking for Floor Sanding Company in Surrey?

---

• Our Flooring Services in Surrey
• Floor Sanding
• Wood Floor Installation
• Floor Cleaning & Polishing

Floorworks in Southwest London...

Why Choose Our Floor Restoration and Floor Fitting Services?

Choosing Floorworks for your floor restoration or wood floor installation and floor cleaning means that you choose not just a professional flooring service provider, but a reliable and long-lasting partner. Our outstanding flooring services are complemented by:

• Friendly customer service, which guarantees enjoyable customer experience.
• We offer home surveys in 6 days of the week, by professional wood flooring surveyors.
• Well-experienced and fully insured floor fitters and floor sanding experts.
• We provide Service Guarantee - labour and materials on our installation services.
• Free advice on flooring products, services and after care.

What Commercial Services We Do In Surrey?

For our business clients commercial flooring services to the highest industry standards. We have many local commercial floors with excellent customer satisfaction rate. Today we continue to provide outstanding commercial flooring services to:

• Business Offices, Retail & Showrooms in Surrey
• Surrey Schools & Nurseries
• Surrey Restaurants & Pubs
• Local Churches & Community Centers
• Museums, Galleries, Theatres and other critical for dust extraction public places.

Whatever the type of flooring and whatever the need for flooring service, contact Floorworks today, regardless of the size of the project.

See What Our Clients from Surrey Say About Us...

• ★★★★★

  Floorworks are easy to deal with, they are accommodating and very helpful. Their work is of a high standard. I would definitely recommend them.

  Sam Weber-Brown, homeowner from Surrey,
• ★★★★★

  Careful, competent and delightful .

  Scarlett Taylor, homeowner from Surrey,
• ★★★★★

  Excellent results!

  Raj Hardy, homeowner from Surrey,

Do You Have a Question?

• Is it possible to sand engineered wood flooring?

  Engineered wood floors can be sanded and the restoration process is done in the same way as hardwood or parquet floor sanding, allowing you to remove deeper dents and scratches and to renew the floor’s appearance.

  However, sanding engineered wood flooring should always be approached with extra care, because it is only the top layer of solid wood that is sandable, rather than the whole plank. Therefore, before you do any works on engineered floors, you need to make sure that the top layer is at least 3 mm thick to avoid any unrepeatable damages. You can do this by checking the thickness at door bars or around radiator pipes.

  We strongly advise hiring a professional floor sanding company for your engineered floor restoration rather than trying to do it yourself because if you do not have the required skills and knowledge, you can easily cause damage and may end up having to replace the floors all together.

• Make teak parquet flooring colour lighter or keep it natural

  Hi Amy,

  Before sealing, unfinished teak can resemble oak in its light color. However, once sealed, teak typically darkens to a rich brownish hue.

  Like other exotic timbers, teak can be tricky to seal with normal water-base primers and lacquers. It will leave darker shaded streaks in areas where the roller has overcoated the previous pass. To avoid this, a solvent-based primer is used, e.g. Junckers SP Primer. This type of primer provides the best base for finishing exotic timbers, and it will make the original wood colour stand out even more with a rich, deep tone.

  If you prefer to keep the unfinished look of the teak or make it lighter, the only options available will be to use invisible / raw lacquer, like the Bona Mega Natural lacquer (or similar), or stain the floors with white-tinted primer (whitewash), such as Bona White primer or Junckers Prelak White. 

  The challenge here is how to apply these products on teak timber and avoid roller marks during the application. Applying these finishes on teak can be challenging, and we highly recommend to have a professional with experience in exotic woods handle the application.

  Ideally, timbers like teak, merbau, mahogany, walnut, jatoba should be left in their natural look.

• Can you repair blobs on my recently varnished wooden floors?

  The appearance of blobs may be a result of an insufficient bonding between the different coats of varnish or between the first coat of floor varnish and the timber.

  This sometimes happens if the floors have not been perfectly sanded to a very smooth finish before the application of the varnish or when the previous sealant was not completely sanded down before the new varnish was applied.

  The only solution we would recommend is to re-sand and re-varnish the floors again to ensure a smooth sanded surface and a proper application of the coats of varnish on top, ideally done by a professional flooring company to avoid this happening again.

  However, you need to ensure that your floors have a sufficient remaining solid wood top layer available for another sanding. Each time the floor is sanded, a small portion of the top layer is removed. If the top layer becomes too thin, further sanding could potentially expose the underlying core material. It’s essential to measure the remaining thickness of the wear layer to confirm whether sanding is a viable option.

  If you're unsure, a professional can help assess the condition of the floor and recommend the best course of action.

  For further advice, or to book our wooden floors sanding services, please do not hesitate to contact us.

And Some Frequently Asked Questions...

• How long does sanding & painting stairs take?

  Sanding and painting stairs generally takes between 3 to 5 days for an average staircase. This timeframe is influenced by the number of steps, the condition of the existing surface, and the desired finish. The process begins with thorough sanding to remove old paint or varnish and create a smooth, clean surface for adhesion. This can be time-consuming due to the confined and intricate nature of stairs. Multiple coats of primer and paint are applied and the drying time can be between 2 to 5 hours per coat.

• How many coats of oil are included in your service?

  Our sanding and oiling service includes 2 coats of clear hardwax-oil or 1 coat of colour oil followed by 1 coat of clear oil.

  Depending on the timber species and its specific requirements, we can occasionally increase the number of coats to ensure optimal protection and finish.

• Can water damaged solid wood flooring be restored?

  Similar to parquet, the possibility of restoring water-damaged solid wood flooring hinges on the severity of the damage. Minor surface water damage, which might cause some light staining or slight raising of the grain, can often be successfully addressed through sanding and refinishing.

• Do you hire local floor sanding technicians?

  Floorworks™ employs local to Surrey experts in floor sanding and is constantly looking for talents with skills & experience to join our expanding team. To find more about our current job openings for floor restoration experts in Surrey or call a member of our team for details.

Made by Floorworks™ in Surrey

More from Floorworks^™

Our local Surrey portfolio includes a wide range of floor sanding projects from floorboards restoration on Guildford Road, next to Guildford High School, to paquet floor sanding, finishing and repairs on Epsom Road, near Epsom College.